Reinforced hoses
Flexible reinforced hoses for suction and discharge connections and for accommodating movement between equipment. Steel helix reinforcement prevents collapse and kinking. Supplied factory-crimped with couplings, ready to install.
For installation selection, call: +48 68 458 55 70
// APPLICATIONS
Where it works
Flexible reinforced hoses connect equipment in suction and discharge systems while accommodating relative movement. The steel helix prevents collapse and kinking, while textile plies carry pressure loads.
Selection for your system
The rubber compound, reinforcement, diameter and end connections are selected for the medium, pressure, temperature and operating conditions. Hoses can be cut and crimped to length with couplings or flanges ready for installation.
Pumping stations
Water suction and discharge
Industry
Process and abrasive media
Mining
Slurries and hydraulic transport
Construction
Concrete, mortar and aggregates
Specifications
| Nominal diameters | DN25 – DN400 |
|---|---|
| Nominal pressure | PN6 / PN10 / PN16 |
| Operating temperature | -20 °C … +80 °C |
| Compounds | NR, EPDM, NBR — selected for the medium |
| Reinforcement | Steel helix + textile plies |
| End connections | Flanges, couplings, threads and quick couplings |
| Length | Cut and crimped to length |
| Configurations | Suction, discharge and suction-discharge |
Configuration guide
| Duty | Compound | Reinforcement | End connection |
|---|---|---|---|
| Suction | NR | Helix | Loose flange |
| Discharge | EPDM | Textile | Coupling |
| Oil-based media | NBR | Helix | Thread |
| Abrasive media | Heavy-duty NR | Helix | Flange |
// Indicative table. The compound, reinforcement and end connection are confirmed by our engineering team after reviewing the operating conditions.
// DESIGN
Design features
Flexible connection
Accommodates movement and vibration between equipment without transferring unnecessary loads to the system.
Vacuum resistance
The steel helix prevents collapse, flattening and kinking during suction service.
Ready to install
Factory crimping, supplied couplings and cutting to specified length reduce on-site installation time.
You may also like
Rubber expansion joints
Accommodate thermal expansion, vibration and pipeline movement.
- Diameters DN32–DN3000
- Pressure PN6–PN25
- Temp. up to 130 °C
- Material EPDM / NBR / IIR
PTFE expansion joints
Full chemical resistance for aggressive media and high temperatures.
- Diameters DN25–DN600
- Pressure PN6–PN16
- Temp. up to 260 °C
- Material PTFE
Pinch valves and sleeves
Control and isolation of abrasive media with a replaceable rubber sleeve.
- Diameters DN15–DN300
- Sleeve NR / EPDM / NBR
- Medium abrasive
Need a solution selected for your installation?
Provide the medium, diameter, pressure and temperature. An engineer will prepare a selection and quotation with no obligation.